Thanks for all the help

I just wanted to thank everyone on the forum, and for the existence of the forum. Over the last couple of months you have helped me write macros (and taught me VBA coding along the way). The macros are saving me a great deal of time as I am analyzing 100 sets of data, each with 3 input files.

Before using macros this work was taking me many hours to manually read-in the data, summarize the 100 sets and copy into Powerpoint. This is all done via macros now and takes just a couple of minutes.

Again thanks to all involved.

Cam

Good post.
Likewise, I have received help beyond expectation.

The two things that strike me most are the amount of time some are willing to donate to help others and the lack of ethics I see from many receiving that help when it comes to thanking them.

Hey I was planning on writing a thanks note late this week, but after seeing this thread I think I shall just add it here.

Like the others I really want to say thanks to everyone from this forum who has helped me over the last 6 months. As of August last year I had no idea on how to use VBA, and was given the task of writing two analysis programs for the company, I could not have done it without the help I recieved.

I am now moving departments so am not sure my new boss will let me play around with coding but I definately want to keep up the skills I learnt so I may still be on here asking for help occasionally.

Thanks again.

Robyn

I likewise really apprecate everyones help! Being a CPA it takes a lot longer for me to learn VBA because I don't get to use it often enough to remember what I learn sometimes. However, I am working on that!

So please be patient as I make mistakes posting. It's certainly not intentional & I will take care of any problems brought to my attention.

Thanks a million, mikeburg

I agree with all the above posts and would also like to thanks everyone for the help I've recieved with excel difficulties I've had.

I'd also like to say that it gives me a great buzz to be able to reply to another poster and give help where I can.

Seamus

I wish to joint to the ones expressing their grattitude towards the existence of this forum, more than that, expressing the grattitude towards the fantastic PEOPLE who make all that differencce and provide not only VBA support, but to a certain extent... they do contribute to other peoples' development interpersonally too. My take-away beyond some VBA-basics is to try to help others, wherever I can.
I wish sustainabilty, prosper, growth and the status of being stored in other peoples good memories.

Gabor

Thank you so very much---- YOU ARE THE BOMB !!!!!


This will make my job so much easier and quicker. I am sure I will have more questions about something else.


Tina

I know I have been using this forum off and on for over 2 years and I have been taught a tremendous amount from those who contribute. Thank you for all you do.

Michael

I can only echo the many posts above this one.
I've found this forum invaluable over the last couple of years now and have learnt so much from my humble noobie beginnings.
It only works because of the fantastic attitude of the peopel who use it and moreover to those who spend the time to help others with their queries.

Long may it continue and my thanks again.

Tris

Hi all

I received a lot of help too. The reply I received was waaay beyond my expectations. Thanks once again to the forum and the moderators.


Thank you
- Ameya

I can only express my thanks - just like everyone else.

You guys (& those on other forums) have saved myself (and my colleagues) a vast amount of time by helping me to automate some of the more time-consuming tasks - as well as teaching me a little along the way...

You are our heroes

Thanks.

I would just like to thank the forum user broro183 for his persistence in fixing my problem with a large project I have undertaken. His help is greatly appreciated and I will certainly be using the forums again in future!

~Liam

i too wish to thank everyone on the site.
there are certain resident gurus here who save me a ton of time at work and give great easy to follow solutions.

thanks people

I've only been on here a short time, and the help I've gotten from folks on this site is amazing. I'm just doing silly stuff, and trying to automate a few things. But the help that you have all given me has been amazing. These are really mundane tasks and your assistance in helping me automate them has been nothing short of awesome. As I learn VBA, I hope to ask less of everyone and be more of a help myself. Until then, Thanks again.

-gshock

Allow me to ditto the sentiments above. I've gotten quite a bit of help; some through actual posts of my own and others from the responses given to other people (who happen to have the same question as I).

Again, thanks.

Same as everyone else, received helpful advice on my question here, solved it with ease after i had been answered.

Thanks so much.

I've just been a member for a short time...my problem was driving me crazy....rylo's help was priceless...his code was short and sweet and got the work done just right

thanks a lot man

just wanted to say thanks from me too - this site is great and the people so very, very helpful

not only have I been helped but I've learnt from the help too

many thanks to all

R

i too cannot thank everyone enough

the knowledge on this forum is immense and the patience that the experts have shown to me and others for nothing is amazing
there are plenty of people that have halped me and while im still a novice and very unsure about formulas i am learning all the time thanks to the people on this forum

once again thanks so so very much

i wont name names, as i cannot remeber them all and it would be unfair to thank only the ones i can remember. Just a big general THANKS to everyone who has helped me on here. i cannot grasp VBA, but there are lots of you who are very happy to share your knowledge and get me out of problems in my spreadsheets. i have learnt a lot from you guys.

i have posted in the past on another very strict excel forum, obeyed the (many) rules, only to get carcastic put downs from the formum administrator as he felt my question was obviously not worthy of his 'intelligence'. On here you do not seem to care about the level or intelligence of the poster, only about helping them out if you can and for that i give a big THANKYOU.

Some of you may remeber writing code for me, if you do please give yourselves an extra pat on the back. Keep up the great forum!!

I join everybody in this thread to also thank everybody that has helped me with some of my assignments.

Especially DAVESEXCEL, thank you so much.


Thank you all.

I too would like to give thanks,

I have had a few situations, some in depth, some trivial, and some just ended up being typing errors (that I did not notice).

No matter what the issue was everyone who helped was courteous and that makes me feel welcomed here.

Thanks for all the time that was put into helping me make my life a little easier.

I need to toss up my thanks in here! I've been able to help a little in the general forum, but the programming section has been a life saver for work these last 2-3 weeks.

You guys rock!

To all the 'helpers' out there.

I've only been using this site for a couple of months, but I would like to add my thanks to the growing list in this thread. If you can't find help (or guidance) in some of the other threads/posts in this forum you're sure to find it in the reply to your own post - offered unstintingly by those out there around the world.

Like everyone else who has received aid and assistance I can only offer my gratitude for a job well done.

Keep up the good work.

Many thanks and kind regards.

NoCanDo

I've haven't been on this forum for that long, but I can say this has quickly become one of my favorite places on the web. Everyone is exceptionally talented and very willing to help newbies like myself. It's amazing how much knowledge is contained in this space.

Thanks a lot to everyone for making this such a great place!

I just wanted to say thank-you as well. Your help has been fantastic!

Hi
Yep, this forum is of great help. Particular thanx to Roy. Keep up the good work you all.
I have posted just twice but expect a lot more in the next month.

cheers
Jeya

I really wants to say thanks to members of this forum. i really wants to say thanks to the Contributor and moderator of this forum.

I saw this thread and wanted to give Rylo a big thanks. As I read through the this thread I saw your name several times. Your obviously part of what makes this website such a great resource. I appreciate the time you took to help with my macro needs. It stopped the complaining I was receiving about the workbook locking up everytime a change was made.

Thanks again,
Popa

No kidding. This place is absolutely great! It has helped do things with Excel that I never thought possible. Thanks so much!

Veronica

I'm beginner in the Excel VBA and this Forum, but in the short time this forum has been very useful for me.

I'm very Thanks for sharing information and your helpful answers.

Please, add my tribute of deepest gratitude for the unvaluable help I've received at this forum.
ACA

Thanx a lot for all the help and support I get here! Thank you!

I just so grateful to have found this forum and all who are assisting. I am learning alot from it.

Thankyou all:

Thank you, everybody!

Every question I've had since I've joined has been answered and everybody has been super-helpful.

This forum is great!

I know that sometimes people get frustrated with the same type of questions and asking for the same type help often. With that being said, let me state that is with great appreciation and admiration I feel when I receive the assistance from this forum. Not all of us learn as fast as other or sometimes ever get the complexity of the codes, formulas, and little tips or tricks. So once again with all the rest of the forum users let me say thanks.

Skip

Special thanks to shg and cherg

Thanks for the help!

Greatly appreciated

I concur, thank you to all who have assisted me along the way. The help and assistance provided here has allowed me to learn and create programs and continue to fuel my desire.

Many many thanks

Just wanted to say, "Thank you." to rylo, royUK, and tekman for their help today. Your comments and suggestions helped me narrow down the problem.

With your help, I was able to take a very cumbersome set of tools, and turn it into a very efficient iteration.

Thanks again.

I love this site. Without question, this is probably the single most helpful website I have ever had the pleasure of using. (As helpful as all of you are, I'm VERY surprised there aren't more posts here.)

Thanks to all.

-gshock

Big thanks to DominicB today.

When you don't know where to start on a problem you can always rely on the people in these forums to either set you in the right direction or more often that not solve the problem completely for you!

Thanks to all contributors to this forum ...I only wish I knew more to help others out too.

Keep up the good work !

Brelin

Thanks for starting such a knowlegable & sensible forum..its been very helpful...thanks everyone contributing to the community...cheers!!

This site rocks!

Thanks for all the help!

Hi,

I agree with every one who posted on this thread. This forum site is the best. I have tried going in different forums but its only here that I was able to receive immediate response. Moreso, the excel god's here are not that too stingy when it comes to writting codes. Some would even stay with you until you were able to accomplish what you are trying to do. Also some would do the extra mile of fixing your entire coding. Kudos to all moderators!

Special thanks to the following: Rylo, Leith Ross, Richard Buttrey, royuk, dominicb, andypope and VBA Noob. You guys rock this site. I can't thank you enough for helping me accomplish my first project. God bless you on all what you do.

Thanks,

Stoey

I have been here for sometime now, I would like to thank everyone who has helped me and all other people who are involved with this site. Its a great initiative on their part.

thank you all..

arora

Just started using this forum a day ago and i have to say, although still without result, i have to thank people for being so understanding with novices like me.
So thank you and i hope that in a no so distant future i can do my share for you lot

Thank you
Jsantos

Hmmm.. you all ppl must thank me and wel come me as I am here to solve your critical issues and answer most logical and complex question.

Great!, thank you!, my complex question is: Whats the very last digit achievable in PI?

It's between 0 and 9 and 0 and 9 can be included.

Charlize

give me chance again...

I've got to agree.. I've only had one or two issues and help was provided quickly and in a language I can understand (translated to "dummy" language for me .

Just want all of the helpers out there to know that they are greatly appreciated!

Great site great people willing to help...
Thanks guys..

I couldn't agree more with the initial post, this forum has been a God send and I don't know where I'd be without it. I shudder to think of how much time would be wasted doing things manually without the help from this site. You guys rock!

I would like to thank RoyUK for the biggest favour that someone did in the last time. Thank you so much.

You rescued my working place .


Boris

........ To all those who dedicate their much valued time to assiting others with the numerous questions posed on this site.

Rylo - Your assistance has been greatfully received and not only have I achieved what I wanted I have learned a lot in a short space of time. I will no doubt be calling on this site again for ironing out any little bumps I come across.

Many thanks again.

Me too I'd like to give my thanks here, altough I'm a bloody beginner, with the help of this forum I have managed to create quite amazing workbooks !

I would like to add my thanks to all those who give so freely of their time to help us novices out.
I am new to coding and really enjoy trying to make something work but know I would never get there without the help of you guys.
In particular the regular moderators, VBA Noob, Shg, RoyUK, Andy Pope, Dominicb, Leith Ross, Daddylonglegs ETC......
Not intending to miss anybody out, I'm sure the "Regular" responders will vary according to time zones.
As A newbie I'm learning a lot as I go along and look forward to the time I'm able to help out others the same way.

joined today, had 2 queries, got 2 working answers, now thats good service!
good work! thanks guys

For those today and in the past that have provided me help, I would like to send out a thousand "Thanks". I have learned a great deal through this site and would still be using the old long method of work had it not been for this forum. You guys are great and deserve a pat on the back.... Many Many Thanks.....

I use this site alot when I am working on a project. I have found alot of threads to be very benificial for my needs. This has made it possible to not have to post my own however the ones that I couldn't find, the responses were quick and very helpful. I refer all my co-workers to this site if I can't figure out the problem.

Just a quick note to express my appreciation for the help I have received from this forum. I look forward to the day that I can provide assistance to users and help give back some of the help that I have received.

Matt

I just wanted to say thank you to all the talented programmers in the forum. I knew NOTHING of VBA a few months ago, and now am writing some basic macros and steadily increasing my knowledge. You all helped me through some difficult situations and had a lot of patience. This is a great forum to get help from!

Best excel forum around. Everyone chips in. Problems are always solved and know-how is passed on.

Thank you everyone I believe

Thanks a lot for all worthy members. I learned a lot about excel in this forum. My special thanks to Martindwilson who really was forthcoming in every problem about excel.

Flower R.

I registered today - and the reason I registered is the help I have already received indirectly - from reading solutions to other peoples problems!
Over the last few weeks this has helped me immensely.

My thanks to the gurus!!!! [:}

Yes, thank you very much. Between the moderators and forum members this is a great place to not only find answers to VBA and excel brainbusters, but to enjoy the challenges of unlocking all excel can do with other like-minded users.

Thanks, God Bless!

hey all "Excelians" thanks a lot for all the help. This forum is the best place around to get help which cannot be gotten by goin thru any formal course.
Thanks once again....

thanks for all the help
you make my life easier

Absolutely right, this' the best forum for Excel and I thanks those who have spent many hours on helping us solving problems. Huge credit for them.

This is the most helpful forum for MS Excel, from the technical knowledge to the willingness of posters to pitch in and provide solutions.

Thank you all.

Just gonna jump thins bandwagon. If your like me ie not really logical and stumbling your way through VBA (and contantly getting a bruised forehead from banging on brick walls), well, this site is a godsend. All the moderators are stars and as a chef, if any of you wants a three course meal for nowt i'd certainly cook up a storm, as you do with my messy code.

Many, many thanks

This forum is just awesome I just have some problem but it gives me many solution that I cannot even imagine done by Excel also guys in here are nice and polite not like in any other forum, again thanks for all in this forum especially that have helped me directly in my cases.

Thanks.

Cheers from me too!

Ben

I want to thank such an active forum,u get answers to your questions within minutes of posting.
I have posted only one post but got reply within minutes.
This is going to help me in the long run by helping me learn vba.

Thank you and cheers!!!

I want to thank all of the people the contributors who give the free time to answer my questions and the questions of others. I has really been a great help to my users and for me.

I do not know how much to thank you for having patience with me. A special thanks goes out to RoyUK, Shg, Sahak, and Leith for helping me with a major project of mine.

Thanks guys. I have learned alot about VBA using this forum and appreciate the resource.

I have just joined and it is exciting to hear of such generosity. Hopefully I will learn a lot, have a lot of problems solved and also help others to solve problems I have been able to address.

I would also like to express thanks to people who take the time to figure out issues. I am relatively new to the site, but the help I've gotten thus far has led to recognition at my workplace and has saved many hours of time.

The work you people do is appreciated.

I'd also like to thank you to everyone on the forum (with a special mention to Andy Pope who has helped me immensely!!!) -

Thanks guys

Sam

I have learned a lot from this forum and i want to say thank you so much for all those who are volunteering their time for free. This is the best forum i have seen so far and i am really greatfull for your help. Many thanks.

I just signed up for this forum yesterday and was able to gain a lot from it. I liked their quick response. It has been a big help and I am sure people on this forum will keep up the good job.
---
Thank you,
Milan Limbachia

dito, everyone has been of so much help and i have learnt quite a bit from the posts on the forums as well as replies to my own messages.

Thanks to everyone for your help !!!

Like others , I really want to say THANK YOU to all who helped me complete my project. I would not have done it without people like you who are so willing to provide help to Newbie like myself.
My apologies if I have broken some rules during the process and be assured that it was not intentional.
Ofcourse, i will try my best to follow the rules.

Again, THANKS a million...

I've lurked here for the past week, learning a tremendous amount searching the threads for my various questions. Thanks everyone.

Sharing the knowledge you have invested a lot of time in is a selfless act.

Thanks for the knowledge you've shared with me.

I appreciate the help that received from this forum. Please accept my thanks.

I would also like to thank everyone for there help. I am new and still learning, and I really appreciate the help a great deal; without which I would be stuck and frustrated for hours. Thank you all again for all of your help.

Hi guys,

I want to thank the people of this forum. I think this place is the best for getting help with VBA with its friendly and helping people. It's people like this that help make this planet a habitable place.

Thanks to all.

Hello

In the past week or a bit more since i found out and joined this fromu i was help a lot of times and it saves me a lot of time to do other stuff here at work.

So i want to thank you all for beeing so helpful and good.

THANK YOU

I Must say a big thanks to this forum, without I'd be clueless.

Many Thanks everybody.

Thanks guys. I have learnt alot about VBA using this forum and most of my works have been automated.

Thanks for your help..

Regards
Arvind

I think everyone is doing a remarkable work by helping each other.. clearly shows degree of unity n commitment. !! hats of to contributers.. !!!

I am very grateful to this forum and to all contributers because they have helped me to solve problems and save at least 100 years of time. And all this in a noble spirit and friendly and admirable manners. This forum is one of the best examples how internet can be used in positive way and also one of the best examples that wisdom is enriched by sharing it.

This is my favorite website, i have learned a lot of things about.

In my organiztion people see me as an excel guru, that is mainly due to this website. I will recommend all my friends to this website.

Thanks

Nazim

Thank you also for dealing with my stupidity. i can't believe that I can get an answer within 10 minutes of postong and i'm from Australia lol

Me too. I started off knowing very little indeed about VBA, and you have been really helpful when I've got stuck. Have learnt a great deal over the last month or so. Many thanks,
David

I will add my name to the list of folks who have said Thank You.

I could not be where I am today, with the vba knowledge I have, had it not been for several of the folks on this forum and others like it.

You simply cannot learn a lot of what you learn off these forums...from books and/or classes. I have a boat-load of books, and have taken several classes...and I have learned more from these forums for sure.

So...thank you, thank you, thank you...

Stu

Super smashing great... I still haven't mastered Macros but the help from this forum is second to none thanks all.

Martyn

My problem has not yet been resolved, but I can tell the guy helping me out, "Phil_V", is on his way to solving the problem at breakneck speed.

THANK YOU PHIL_V! AND THANKS TO EVERYONE WHO DIDN'T GET TO SEE MY POST IN TIME :D

I wanted to say a big thanks to Antonio. The help I have recieved is just what was needed. I can't tell you how pleased I am.

I think I must thank DonkeyOte aswel for putting up with my rather silly/basic mistakes, in my first post, a few days ago.

Thank you so much the help I have recieved is fantastic.

Thanks again,

Andy

Better to be burried at the end of a long list than completely unheard...

I also want to thank those who administer and contribute to this site. Like so many others, I was sort of put into a position in my office to become "the excel guy" - the tolerance you all have for us noob's and the expertise you have in solving problems is simply incredible.

Because of this, I've thoroughly enjoyed learning bits and pieces of coding, have embraced my new role at work, and for the first time in as long as I can remember, actually ENJOY coming into the office every day. It's like putting together a big puzzle, then getting to see people all over the world using it! Fun stuff.

Thanks again!
JP

I have saved a lot of time because of you
There is nothing like sharing knowledge...that means simple...evolution!

Thanks for all the help i got,hope it will continue if the future!

I agree with all of you that this forum is the best thing on the web. The forum rocks and so are all the members who have been helping each other. I have received great help from everyone and thankful to all of you.

Just noticed this, I guess it's an extended thank you not? If so, many thanks to everyone who has helped me so far. In the past two days with the tremendous help of posters here I have saved countless hours of manual data checking with a few simple codes.

I really do love this site. I'm gonna learn so much. right now i'm just a premmie newbie looking for some kool answers and help along the way. Just want to thank all the contributors that have provide support and continue to provide support, even tu us (newbies and the unlearned)....


Gratias friends.....

Same for me, I have got some valuable leads and suggestions from this forum.
Sometimes No reactions....but I mostly get my solution by searching or posting.

Good site!

I have not thanked you all yet.
For those that have replied im my post i thankyou once again.
And for those of you that make this forum what it is, Ill rase a glass for you every now and them.
The power of people spending their time on a common goal is sometines overwelming, the knoldege that you have shared with me and others help us all to see the power of excel and Vba Programing.
Thankyou All.

I have to say that this is a great site! The Mods do their best to help in any and every way possible, while policing the site for rule breakers like myself (well, the old me). There are others around who help in answering questions which sometime speeds the process up. I want to thank all who have took the time to answer my noob questions that some may have passed up. Sometimes I don't have the time to try to think out VB code on my own and this is a great place to search or ask others for help!
Thanks again!

This forum has provided so much targeted and specialized help to me. I can't thank everyone enough for being so knowledgeable, concise and amazingly prompt with your replies!

Thanks to everyone on the forum- You have all been a tremendous help, and are a great asset to the excel community!

Introduction: I am that guy who is pestering all these excel pros pretty much daily with some strange requests for help.

I think it really is about time to say a very big thank you to all contributors of this forum. I just started out with VBA about 2 weeks ago and now finally, with the help and patience of many users here, to write my first real BIG macro. Work is getting easier using all these macros for several time consuming tasks, and pretty much all of them came or were inspired from members of this forum.

I thank everyone for contributing their time and knowledge to this place and who knows, if I stick around long enough, I might be able to answer some questions myself one day

Keep it up!
A2k

I think it was about time this happened. A million thank you to all the contributors.

thanks for this great Forum, you guys help me learn a lot of things!

I'd like to thanks those who spend some time helping us, you're are our great heroes, thank you heaps

Hi Team,

I would like to thank every exepert on this site who helps most of the excel innocents and help them to learn some part of excel VBA.

I specially learnt many new things from this site thanks to all the moderators and gurus.

Regards,
Shekar Goud.

I too have recieved help beyond all my expectations, Totally Amazing! You've saved me many many hours of frustration and anger.

A million thanks from Norway

Greatest community ever! Thanks to the gurus and the other contributors! Keep up the good work!

I would like to say THANKS! to EVERYONE who contributes to this forum, whether or not they have directly or indirectly helped me. After all, without the many contributors to this site, no-one's queries would be answered.

I've used many forums before but this has to be one of the best, if not, THE best, most concise, practical, accessible and, most importantly, helpful, resource for Excel VBA coding.

I would still be under my desk chewing on carpet tiles for stress relief if it wasn't for this!

thatks for the help that i have been given so far, and for all the future help i will need... and someday i will hopefully be able to give help myself, when all this sticks in my brain and i can work freely without assistance!
N

This forum is truly awesome!

If you make an effort to pose a clear question it will be answered in no time. I don't believe I've waited for longer than an hour.
The answers are spot on too.
I can't thank you guy's enough, you have taught me a lot AND saved me hours of fiddling around.
I only wish I were smart enough to help someone.

my best regards,

Jeroen

Thanks for this forum, it is proving to be a very usefull tool I am learning lots just from reading other users posts.

Thanks to all those how put there time & energy into helping others out just becuase you can

cheers rex

I also want to thank you all on this forum. This is great Forum and it is very helpful. After using this F. i am improved my self.
thx a lot.

Just wanted to post some thanks (hopefully in advance). Its a great resource. Even if no-one can solve my particular problem, there are many old threads that have prooved useful to me, and I wanted to thank everyone for spending their precious time helping others.

You have all been such a great help and have made me want to learn more and more. Just hope that doesnt mean more and more questions for you all :o)

Thanks again!!!

Thanks to everyone, esp. RoyUK for excellent help on many occasions. I am continually amazed at the generosity and kindness of everyone involved here.

To all involved in helping me, thank you again. I will be back with more questions when I have them.

Thanks for all the help you all provide here, besides my own post the all the other ones are gold mines of information !

Yes! Thanks a ton

I hope to be able to repay the favor someday.

Thanks to all of you for the help, just reading through some of the posts I was able to answer my questions without posting. Fantastic site.