"S" Shape Indicator - Help / Support Need

[pacosalasv]

Well, here is a good challenge that i cant solve it... Probably any of you can support with a solution.

I want to create a Monthly Status "S" Shape Indicator divided by 31,30 & 28 (February) based on aplicable active month.

Probably any of you can help me with a solution and/or how to do it.

Thanks!

Attached you will find a picture of the "S" that i want as sample.

S Shape.png

[alansidman]

Administrative Note:

Welcome to the forum.

We would very much like to help you with your query, however it has been brought to our attention that the same query has been posted on one or more other forums and you have not provided the required cross-post link(s) here.

Please see Forum Rule #3 about cross-posting and adjust accordingly. Read this to understand why we (and other sites like us) consider this to be important.

(Note: this requirement is not optional. No help to be offered until the link is provided.)

[pacosalasv]

Administrative Note:

Welcome to the forum.

We would very much like to help you with your query, however it has been brought to our attention that the same query has been posted on one or more other forums and you have not provided the required cross-post link(s) here.

Please see Forum Rule #3 about cross-posting and adjust accordingly. Read this to understand why we (and other sites like us) consider this to be important.

(Note: this requirement is not optional. No help to be offered until the link is provided.)

Thanks for advice. Here is Cross Post Link:

https://www.mrexcel.com/board/thread...-need.1148297/

[alansidman]

Please don't quote whole posts -- it's just clutter.*If you are responding to a post out of sequence, limit quoted content to a few relevant lines that makes clear to whom and what you are responding

[Andy Pope]

You might be able to get the effect by using a very think xy-scatter line that traces the output of a S.
The actual outline and segments of the S would be easiest to do with shapes, grouped and then used as a mask within the chart. You could use a single column chart to hold the mask.