Line chart with multiple scales/units along an axis...

Hi!

I have a rather complex chart that I need to create... hopefully someone here can help me with this issue...
The problem is the following:

I have offers from vendors for two types of cables that I want to compare to each other in a chart. One vendor offers the cable in certain lenghts measured in feet and one vendor offers in (different) lenghts measured in meters. What I want is plot the price/feet on the Y-axis and have both a feet scale and a metric scale on the X-axis and the scales are to be linear i.e. fixed intervals at say 0, 500, 1000, 1500... ft and the metric at 0, 500, 1000... meter etc.
There is not a lot of data, basically just this:

Vendor "A":
5000 ft, 8 USD/ft
25000 ft, 7 USD/ft
50000 ft, 6 USD/ft
etc.

Vendor "B":
300 m, 10 USD/ft
5000 m, 7 USD/ft
25000 m, 6 USD/ft
etc...

Plotting this with a line chart with data points marked is not a problem but I can only get one unit on the X-axis where I would like to have 2 scales with different units (ft and meters).

Even better would be to be able to have a third scale on the X-axis that displays the number of units a certain lenght of cable is good for (one unit = 110 ft of cable) so one can look at the chart and read that "xxx meters/feet of cable from vendor A/B equals xxx number of finished units and costs xxx USD/ft).

Whew... maybe too much details but PLEASE tell me this is possible to do!

Any input into how to make such a chart is extremely welcome!

/Johan

Johan -

Here's how to arrange the data, in four columns:

Vendor A Vendor B
5000 8 300 10
25000 7 5000 7
50000 6 25000 6

Make an XY chart (not a line chart) with the vendor A data (including the
first row with the blank and 'Vdr A' label). Copy the vendor B data (incl.
the first row with the blank and the 'Vdr B' label), select the chart, and
use Paste Special from the Edit manu to add the data as a new series. Double
click on the Vendor B series, and on the Axis tab, select Secondary. Go to
Chart Options on the Chart menu, and on the Axis tab, uncheck the secondary
Y axis but check the secondary X axis. Double click the bottom X axis, and
on the Scale tab choose appropriate values for the maximum and major units,
and make sure the Auto boxes in front of the input boxes are unchecked.
Double click on the top X axis, and on the Scale tab, enter an appropriate
value for the maximum scale, and for the maximum, enter the maximum of the
bottom scale times 0.3048, the conversion factor from feet to meters; again,
make sure the Auto boxes are unchecked.

- Jon
-------
Jon Peltier, Microsoft Excel MVP
Peltier Technical Services - Tutorials and Custom Solutions -
http://PeltierTech.com/
2006 Excel User Conference, 19-21 April, Atlantic City, NJ
http://peltiertech.com/Excel/ExcelUserConf06.html
_______

"JohanD" <[email protected]> wrote in
message news:[email protected]...
>
> Hi!
>
> I have a rather complex chart that I need to create... hopefully
> someone here can help me with this issue...
> The problem is the following:
>
> I have offers from vendors for two types of cables that I want to
> compare to each other in a chart. One vendor offers the cable in
> certain lenghts measured in feet and one vendor offers in (different)
> lenghts measured in meters. What I want is plot the price/feet on the
> Y-axis and have both a feet scale and a metric scale on the X-axis and
> the scales are to be linear i.e. fixed intervals at say 0, 500, 1000,
> 1500... ft and the metric at 0, 500, 1000... meter etc.
> There is not a lot of data, basically just this:
>
> Vendor "A":
> 5000 ft, 8 USD/ft
> 25000 ft, 7 USD/ft
> 50000 ft, 6 USD/ft
> etc.
>
> Vendor "B":
> 300 m, 10 USD/ft
> 5000 m, 7 USD/ft
> 25000 m, 6 USD/ft
> etc...
>
> Plotting this with a line chart with data points marked is not a
> problem but I can only get one unit on the X-axis where I would like to
> have 2 scales with different units (ft and meters).
>
> Even better would be to be able to have a third scale on the X-axis
> that displays the number of units a certain lenght of cable is good for
> (one unit = 110 ft of cable) so one can look at the chart and read that
> "xxx meters/feet of cable from vendor A/B equals xxx number of finished
> units and costs xxx USD/ft).
>
> Whew... maybe too much details but PLEASE tell me this is possible to
> do!
>
> Any input into how to make such a chart is extremely welcome!
>
> /Johan
>
>
> --
> JohanD
> ------------------------------------------------------------------------
> JohanD's Profile:
> http://www.excelforum.com/member.php...o&userid=32573
> View this thread: http://www.excelforum.com/showthread...hreadid=523733
>

Thanks! That works great!

One question, is there any way to have both x-axis at the bottom of the chart instead of one on top and one on the bottom?
I did not find any way of changing their position...

Follow up: if it's possible to have several axis at the same place (i.e. if my question above is possibe) then I guess it should be possible to have a tertiary axis (X-axis) also but if the X-axis can only be put on top or on the bottom of the chart I guess a third x-axis is out of the question?

Thanks,
Johan

You cannot get both X axes right at the bottom, but you could offset one
somewhat by changing the Crosses At value. For example, you could have one
horizontal axis at Y=0 and the second at Y=1. Y=0 is easy. For Y=1, double
click the corresponding Y axis (primary or secondary, and do this before
unchecking the secondary Y axis, if you're placing the secondary X axis at
Y=1), and on the Scale tab, enter 1 in the Category/Value X Axis Crosses At
box.

For a trick to get a tertiary axis (it can be adapted to horizontal axes):

http://peltiertech.com/Excel/Charts/TertiaryAxis.html

- Jon
-------
Jon Peltier, Microsoft Excel MVP
Peltier Technical Services - Tutorials and Custom Solutions -
http://PeltierTech.com/
2006 Excel User Conference, 19-21 April, Atlantic City, NJ
http://peltiertech.com/Excel/ExcelUserConf06.html
_______

"JohanD" <[email protected]> wrote in
message news:[email protected]...
>
> Thanks! That works great!
>
> One question, is there any way to have both x-axis at the bottom of the
> chart instead of one on top and one on the bottom?
> I did not find any way of changing their position...
>
> Follow up: if it's possible to have several axis at the same place
> (i.e. if my question above is possibe) then I guess it should be
> possible to have a tertiary axis (X-axis) also but if the X-axis can
> only be put on top or on the bottom of the chart I guess a third x-axis
> is out of the question?
>
> Thanks,
> Johan
>
>
> --
> JohanD
> ------------------------------------------------------------------------
> JohanD's Profile:
> http://www.excelforum.com/member.php...o&userid=32573
> View this thread: http://www.excelforum.com/showthread...hreadid=523733
>