+ Reply to Thread
Results 1 to 5 of 5

Off Topic a bit... but to this newsgroup

  1. #1
    cadcamguy
    Guest

    Off Topic a bit... but to this newsgroup

    I haven't been someone who has used Excel to any real extents before... I
    have used VB before it was Visual, back in the Basic days.
    I have always found it to be a great tool for doing file manipulation
    something in the Cad/Cam field that I have to deal with quite often.

    But when it came working with spreadsheets, I had very little interest in
    them. I always felt they were drier than the sands of the Sahara.

    Well, in just the past few days from some of the feedback I have been
    getting from this group and seeing how one uses what Excel can do and
    combining that with VBA my feelings about it all have done a 180 degree
    reversal.

    The bug has bitten folks and I feel that this newsgroup has played a major
    factor in that. It has to be one of the fastest moving and most informative
    groups that I read.

    So to all in this group... A BIG THANKS....never thought I'd be the one to
    say I find Excel exciting :-)

    The new convert,
    CadCamGuy




  2. #2
    Bob Phillips
    Guest

    Re: Off Topic a bit... but to this newsgroup



    "cadcamguy" <piearesquared2@NOSPAMyahoo.com> wrote in message
    news:OJ41LeleFHA.2244@TK2MSFTNGP15.phx.gbl...
    >
    > The bug has bitten folks and I feel that this newsgroup has played a major
    > factor in that. It has to be one of the fastest moving and most

    informative
    > groups that I read.
    >

    I think we all agree with that.



  3. #3
    Knut
    Guest

    Re: Off Topic a bit... but to this newsgroup

    hear ! hear ! hear !

    knut
    "cadcamguy" <piearesquared2@NOSPAMyahoo.com> skrev i melding
    news:OJ41LeleFHA.2244@TK2MSFTNGP15.phx.gbl...
    >I haven't been someone who has used Excel to any real extents before... I
    > have used VB before it was Visual, back in the Basic days.
    > I have always found it to be a great tool for doing file manipulation
    > something in the Cad/Cam field that I have to deal with quite often.
    >
    > But when it came working with spreadsheets, I had very little interest in
    > them. I always felt they were drier than the sands of the Sahara.
    >
    > Well, in just the past few days from some of the feedback I have been
    > getting from this group and seeing how one uses what Excel can do and
    > combining that with VBA my feelings about it all have done a 180 degree
    > reversal.
    >
    > The bug has bitten folks and I feel that this newsgroup has played a major
    > factor in that. It has to be one of the fastest moving and most
    > informative
    > groups that I read.
    >
    > So to all in this group... A BIG THANKS....never thought I'd be the one to
    > say I find Excel exciting :-)
    >
    > The new convert,
    > CadCamGuy
    >
    >
    >




  4. #4
    Jennifer
    Guest

    Re: Off Topic a bit... but to this newsgroup

    Ditto! Ditto! Ditto! I just can't wait until i'm able to help others instead
    of always needing your help. Some day!
    --
    Though daily learning, I LOVE EXCEL!
    Jennifer


    "Knut" wrote:

    > hear ! hear ! hear !
    >
    > knut
    > "cadcamguy" <piearesquared2@NOSPAMyahoo.com> skrev i melding
    > news:OJ41LeleFHA.2244@TK2MSFTNGP15.phx.gbl...
    > >I haven't been someone who has used Excel to any real extents before... I
    > > have used VB before it was Visual, back in the Basic days.
    > > I have always found it to be a great tool for doing file manipulation
    > > something in the Cad/Cam field that I have to deal with quite often.
    > >
    > > But when it came working with spreadsheets, I had very little interest in
    > > them. I always felt they were drier than the sands of the Sahara.
    > >
    > > Well, in just the past few days from some of the feedback I have been
    > > getting from this group and seeing how one uses what Excel can do and
    > > combining that with VBA my feelings about it all have done a 180 degree
    > > reversal.
    > >
    > > The bug has bitten folks and I feel that this newsgroup has played a major
    > > factor in that. It has to be one of the fastest moving and most
    > > informative
    > > groups that I read.
    > >
    > > So to all in this group... A BIG THANKS....never thought I'd be the one to
    > > say I find Excel exciting :-)
    > >
    > > The new convert,
    > > CadCamGuy
    > >
    > >
    > >

    >
    >
    >


  5. #5
    Vasant Nanavati
    Guest

    Re: Off Topic a bit... but to this newsgroup

    Jennifer, I started as a newbie just like you (many, many years ago) and I'm
    still learning new stuff every day. What a great attitude you have!

    --

    Vasant


    "Jennifer" <Jennifer@discussions.microsoft.com> wrote in message
    news:2A4BA737-1C21-4853-B688-28DEA4FF9B04@microsoft.com...
    > Ditto! Ditto! Ditto! I just can't wait until i'm able to help others
    > instead
    > of always needing your help. Some day!
    > --
    > Though daily learning, I LOVE EXCEL!
    > Jennifer
    >
    >
    > "Knut" wrote:
    >
    >> hear ! hear ! hear !
    >>
    >> knut
    >> "cadcamguy" <piearesquared2@NOSPAMyahoo.com> skrev i melding
    >> news:OJ41LeleFHA.2244@TK2MSFTNGP15.phx.gbl...
    >> >I haven't been someone who has used Excel to any real extents before...
    >> >I
    >> > have used VB before it was Visual, back in the Basic days.
    >> > I have always found it to be a great tool for doing file manipulation
    >> > something in the Cad/Cam field that I have to deal with quite often.
    >> >
    >> > But when it came working with spreadsheets, I had very little interest
    >> > in
    >> > them. I always felt they were drier than the sands of the Sahara.
    >> >
    >> > Well, in just the past few days from some of the feedback I have been
    >> > getting from this group and seeing how one uses what Excel can do and
    >> > combining that with VBA my feelings about it all have done a 180 degree
    >> > reversal.
    >> >
    >> > The bug has bitten folks and I feel that this newsgroup has played a
    >> > major
    >> > factor in that. It has to be one of the fastest moving and most
    >> > informative
    >> > groups that I read.
    >> >
    >> > So to all in this group... A BIG THANKS....never thought I'd be the one
    >> > to
    >> > say I find Excel exciting :-)
    >> >
    >> > The new convert,
    >> > CadCamGuy
    >> >
    >> >
    >> >

    >>
    >>
    >>




+ Reply to Thread

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Search Engine Friendly URLs by vBSEO 3.6.0 RC 1