+ Reply to Thread
Results 1 to 6 of 6

Thanks from a member.

  1. #1
    Administrator FDibbins's Avatar
    Join Date
    12-29-2011
    Location
    Duncansville, PA USA
    MS-Off Ver
    Excel 7/10/13/16/365 (PC ver 2310)
    Posts
    52,933

    Thanks from a member.

    I received this PM from a very satisfied member the other day, and after receiving their permission, I thought it would be good to share it with the rest of the members, as well as a huge pat on the back (and my personal thanks) to the member caused these accolades.

    Hi, I hope you don't mind me contacting you with my query, but having already had contact with you and seeing you listed as an Admin in Comm. Servs. section, I'm hoping you can help me.

    Having tried to solve my original problem myself through self teaching by searching the net and using Excel built in features and being unable to do so. I then joined the forum and had my problem solved for me.

    What I requested help with was fully solved but even before I posted my problem I knew(believed) that I would still have to do some data sorting manually even if a fully solved solution was provided to me.

    Now having seen the level of expertise available I believe that my problem can be fully solved. My question re Comm. Servs. is this as I can't seem to see any more detail other than the Sub amounts.

    As the forumite jindon was kind enough to provide me with a full solution to my original request for free and as my new request is a direct follow on to that original request, using the same worksheets and data.

    I would like jindon to continue on helping me and for him to receive payment as he was kind enough to provide his services for free initially and I would like to express my thanks and gratitude in return by paying him for any further services he can provide.

    I understand that he may not be able to solve my new request and someone else may, but I would like to at least give him first refusal as such. Is this possible. Does a responder have to be on a list to provide solutions in the Comm section.

    If he is eligible to provide help in this section, how do I go about contacting him to set this up? Rather than just post my query in the section and have someone else reply ahead of him.

    If I buy credits I assume the site should rightly receive a %, what % does the responder receive, so I can give a fair amount to them for their help.

    While any solution to a problem from any person is welcome, I would not like it myself if I was reading the comm section and seen someone else providing a paid solution to a problem where I had initially solved the first part for free.

    I am grateful for finding this forum and I do not want to ask for further help for free, having read through some threads just out of interest, it amazes me how some people have had their problems solved, many after a number of back and forth posts and they don't even bother their **** to sign off with even a thank you. Such is the way of the World these days, unfortunately.
    I have answered the OP's questions above and have sent Jindon a PM of thanks, as well

    For my part, it is posts like this that make this all worthwhile to me - whether I get them, or another member does, matters not at all to me. Just the fact that someone took the time and effort to not only say "thank you", but when above and beyond to type all of the above and say such good things about our forum and its amazing, generous members
    1. Use code tags for VBA. [code] Your Code [/code] (or use the # button)
    2. If your question is resolved, mark it SOLVED using the thread tools
    3. Click on the star if you think someone helped you

    Regards
    Ford

  2. #2
    Forum Moderator AliGW's Avatar
    Join Date
    08-10-2013
    Location
    Retired in Ipswich, Suffolk, but grew up in Sawley, Derbyshire (England)
    MS-Off Ver
    MS 365 Subscription Insider Beta Channel v. 2404 (Windows 11 22H2 64-bit)
    Posts
    80,830

    Re: Thanks from a member.

    It’s nice to read, Ford - thanks for sharing. I do get a bit fed up with those who can’t even be bothered to add the words "thank you" to a thread, but actually there are plenty who do, which is lovely. You are right: it’s knowing that we have made a positive difference for someone that is what makes it such fun.
    Ali


    Enthusiastic self-taught user of MS Excel who's always learning!
    Don't forget to say "thank you" in your thread to anyone who has offered you help.
    You can reward them by clicking on * Add Reputation below their user name on the left, if you wish.

    Forum Rules (updated August 2023): please read them here.

  3. #3
    Forum Guru
    Join Date
    08-15-2004
    Location
    Tokyo, Japan
    MS-Off Ver
    2013 O.365
    Posts
    22,524

    Re: Thanks from a member.

    Deleted...
    Last edited by jindon; 07-10-2018 at 09:43 AM.

  4. #4
    Administrator FDibbins's Avatar
    Join Date
    12-29-2011
    Location
    Duncansville, PA USA
    MS-Off Ver
    Excel 7/10/13/16/365 (PC ver 2310)
    Posts
    52,933

    Re: Thanks from a member.

    Thanks for the reply

  5. #5
    Forum Guru
    Join Date
    08-15-2004
    Location
    Tokyo, Japan
    MS-Off Ver
    2013 O.365
    Posts
    22,524

    Re: Thanks from a member.

    Sorry, there was a miss understanding about the PM sender.
    I thought the sender was different...

    I appreciate the message and pleasure to help in Free forum, if he wants to continue.

  6. #6
    Administrator FDibbins's Avatar
    Join Date
    12-29-2011
    Location
    Duncansville, PA USA
    MS-Off Ver
    Excel 7/10/13/16/365 (PC ver 2310)
    Posts
    52,933

    Re: Thanks from a member.

    jindon, thank you for responding here, and also, apologies for the mix-up, it was just bad timing

+ Reply to Thread

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. New Member Cannot Download Member Solution
    By LPeteet in forum Tips and Tutorials
    Replies: 1
    Last Post: 03-08-2016, 10:59 AM
  2. Replies: 5
    Last Post: 05-22-2015, 12:51 PM
  3. Replies: 1
    Last Post: 02-22-2013, 08:32 PM
  4. New Member
    By Pius in forum Hello..Introduce yourself
    Replies: 1
    Last Post: 01-11-2013, 06:52 AM
  5. Hello! I'm a new member!
    By VZRod in forum Hello..Introduce yourself
    Replies: 1
    Last Post: 01-10-2013, 07:40 PM
  6. I'm a new member who's old and need help!!!
    By AlfordJohn in forum Hello..Introduce yourself
    Replies: 1
    Last Post: 01-10-2013, 07:39 PM
  7. [SOLVED] PivotTable with Member Property - how to subtotal on Member Proper
    By swordsman in forum Excel Programming / VBA / Macros
    Replies: 0
    Last Post: 06-23-2006, 05:10 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Search Engine Friendly URLs by vBSEO 3.6.0 RC 1